Hello, welcome to Shanghai Pumei Furniture Co., Ltd. website!
Hotline:400-6068-026
Shanghai Pumei Furniture Co., Ltd.
Your current position:HOME > NEWS > Company News

How to choose office furniture

Time:2018-11-28

Views:75

  Looking at the atmosphere, style, and walking in the forefront of fashion, this is the office furniture we are pursuing. Office furniture is a material product and an art. Faced with a wide variety of products on the market, how to choose durable furniture, many consumers have no bottom. Therefore, Shanghai Pucheng Industrial and Furniture Xiaobian conducted a classification guide for furniture selection. The materials for office furniture selection should be reasonable.

  Office furniture selection notes four feet to ensure a smooth.

  This point is flat on the ground and I know that some furniture has only three legs to land. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure.

  2. The office furniture selection notes are flat and tight.

  Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not. Look at the light when you check it, and don't see it when you don't. The ash veneer veneer furniture is more susceptible to damage and can only be used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. Generally, the corners of the veneer furniture are easy to be tilted up. When picking, you can use your hand to rub the corners. If you get up, you will have problems with the glue.

  Whether the edge of the office furniture selection note is flat.

  The edge banding should be rounded and not straight at right angles. If the edge is not flat, the inner material is damp and the edge is prone to cracking. The furniture inlaid with the plywood is nailed with nails. It is necessary to pay attention to whether the nails are flat and the color of the nails is consistent with other places. Usually the nail hole is sealed with putty. If the putty is bulged, it is easy to fall out.

  Full inspection of office furniture selection precautions

  If the wood has insect eyes and ends, it means that the drying is not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is squirting, glaring, or tearing, it means that the formaldehyde content in the adhesive is too high, which is harmful to the human body. The accessories for office furniture selection are properly installed.

  The panel furniture uses metal parts and plastic parts as fastening connectors, so the quality of the metal parts also determines the quality of the inner quality of the panel furniture. Metal parts require dexterity, smoothness, and good surface plating treatment. There should be no rust, burrs, etc., and the precision of the fittings is higher. Plastic parts should be beautiful in appearance and bright in color. The parts of the force in use should have strength and elasticity, and should not be too thin. Open-type connectors require flexible rotation, and the springs inside are tightly fitted so that the furniture is balanced, easy, and friction-free when opened.

  Office furniture selection considerations focus on environmental indicators

  When asking about the price, you must not forget whether the furniture meets the relevant environmental regulations and whether there is relevant certification. If you are buying branded furniture, you can ask and ask the salesperson to explain the smell reasonably. Also check the quality inspection certificate. If the relevant inspection is passed, some smells are inevitable with paint, adhesive, etc. The door can be eliminated for a while.

  The moisture content of office furniture selection precautions should not exceed 12%

  The moisture content of northern furniture generally should not exceed 12%, the water content is high, and the wood is easy to warp and deform. When the average consumer buys, there is no test instrument. You can take the method of hand touch and touch the bottom of the furniture or the place where there is no paint inside. If you feel the moisture, the moisture content is at least 50%, which cannot be used at all. Another way is to sprinkle a little water on the unpainted wood. If it is slow or not, it indicates a high moisture content. Furniture with too high moisture content not only has quality problems, but also increases the release rate of formaldehyde. Ok, Xiaobian will share it here!

  If you want to buy office furniture, please choose Shanghai Pucheng Industrial office furniture custom manufacturers - office furniture, office furniture, I believe we can conquer you with high quality products!

Everyone is asking:
Hot sale furniture
  • Staff chair
  • Executive chair
  • Conference chair
分享到